mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2006 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. july 2006 - rev 14-jul-06 mimix broadband?s 10.0-18.0 ghz gaas packaged receiver has a noise figure of 2.7 db and 20.0 db image rejection across the band. this device is a two stage balanced lna followed by an image reject sub-harmonic anti-parallel diode mixer and includes an integrated lo buffer amplifer. the image reject mixer eliminates the need for a bandpass filter after the lna to remove thermal noise at the image frequency. i and q mixer outputs are provided and an external 90 degree hybrid is required to select the desired sideband. this device uses mimix broadband?s 0.15 m gaas phemt device model technology, and is based upon electron beam lithography to ensure high repeatability and uniformity. the device comes in a 7x7 mm qfn surface mount laminate package offering excellent rf and thermal properties and is rohs compliant. this device is well suited for millimeter-wave point-to-point radio, lmds, satcom and vsat applications. 10.0-18.0 ghz gaas receiver qfn, 7x7 mm page 1 of 6 integrated lna, lo buffer, image reject mixer 7x7 mm, qfn +2.0 dbm lo drive level 2.7 db noise figure 20.0 db image rejection 100% rf, dc and noise figure testing features general description absolute maximum ratings supply voltage (vd) supply current (id1,id2) gate bias voltage (vg) input power (rf pin) storage temperature (tstg) operating temperature (ta) channel temperature (tch) +5.0 vdc 200, 250 ma +0.3 vdc +17 dbm -65 to +165 o c -55 to mttf table mttf table (3) channel temperature affects a device's mttf. it is recommended to keep channel temperature as low as possible for maximum life. 3 3 electrical characteristics (ambient temperature t = 25 o c) units ghz ghz ghz db db dbm dbc db db dbm vdc vdc vdc ma ma min. 10.0 8.0 dc - - - - - - - - - -1.2 - - typ. - - - 15.0 15.0 +2.0 20.0 2.7 40.0 +4.0 +4.0 +4.0 -0.3 80 100 max. 18.0 20.0 4.0 - - - - - - - +4.5 +4.5 +0.1 120 150 parameter frequency range (rf) upper side band frequency range (lo) frequency range (if) input return loss rf (s11) small signal conversion gain rf/if (s21) 2 lo input drive (p lo ) image rejection 2 noise figure (nf) 2 isolation lo/rf @ lox1/lox2 input third order intercept (iip3) 1,2 drain bias voltage (vd1) drain bias voltage (vd2) gate bias voltage (vg1,2) supply current (id1) (vd1=4.0v, vg=-0.3v typical) supply current (id2) (vd2=4.0v,vg=-0.3v typical) (1) measured using constant current. (2) measured using lo input drive level of +2.0 dbm. r1007-qd
page 2 of 6 receiver measurements mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2006 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. 10.0-18.0 ghz gaas receiver qfn, 7x7 mm r1007-qd xr1007-qd, conversion gain (db) 0 2 4 6 8 10 12 14 16 18 20 10 11 12 13 14 15 16 17 18 rf (ghz) [if=2ghz] conversion gain (db) usb lsb xr1007-qd, image rejection (dbc) -40 -35 -30 -25 -20 -15 -10 -5 0 10 11 12 13 14 15 16 17 18 rf (ghz) [if=2ghz] image rejection (dbc) usb lsb xr1007-qd, input p1db (dbm) -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 10 11 12 13 14 15 16 17 18 rf (ghz) [if=2ghz] input p1db (dbm) usb lsb xr1007-qd, noise figure (db) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 10 11 12 13 14 15 16 17 18 rf (ghz) [if=2ghz] nf (db) usb lsb july 2006 - rev 14-jul-06
page 3 of 6 recommended layout functional diagram (note: engineering designator is 14rec0742) mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2006 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. 10.0-18.0 ghz gaas receiver qfn, 7x7 mm r1007-qd pin designations pin number pin name pin function nominal value unit 5 6 7 15 17 19 27 28 29 36 39 41 43 +2.0 4.0 4.0 -0.3 -0.5 -0.1 dbm v v v v v gnd lo in gnd vd3 if1 vd1 gnd rf in gnd vg1, 2 if2 vg4 vg3 ground lo input ground lo buffer drain bias if1 output lna drain bias ground rf input ground lna gate bias if2 output mixer gate bias lo buffer gate bias all other pins n/c july 2006 - rev 14-jul-06 lo in if1 ou t if2 ou t vd3 vg3 vg4 vg1&2 vd1 rf in 10 nf 10 nf physical dimensions 34 38 35 36 37 39 40 41 42 43 44 33 29 32 31 30 28 27 26 25 24 23 lo i n 22 18 21 20 19 17 16 15 14 13 12 vd 3 if 1_ o ut vd 1 rf in vg 1&2 if 2_ o ut vg 4 vg 3 1 5 2 3 4 6 7 8 9 10 11 image reject mixer xr1007-qd lo buffer lna lna gnd gnd gnd gnd
page 4 of 6 app note [1] biasing - the device is operated by separately biasing vd1 and vd2 with vd1=4.0v, id1=80ma and vd2=4.0v, id2=100ma. it is also recommended to use active biasing to keep the currents constant as the rf power and temperature vary; this gives the most reproducible results. depending on the supply voltage available and the power dissipation constraints, the bias circuit may be a single transistor or a low power operational amplifier, with a low value resistor in series with the drain supply used to sense the current. the gate of the phemt is controlled to maintain correct drain current and thus drain voltage. the typical gate voltage needed to do this is -0.3v. typically the gate is protected with silicon diodes to limit the applied voltage. also, make sure to sequence the applied voltage to ensure negative gate bias is available before applying the positive drain supply. mttf typical application mimix broadband mmic-based 10 . 0-18 . 0 ghz receiver block diagram rf in 10.0-18.0 ghz ir mixer lna coupler xr1007-qd bpf if out 2 ghz lo(+2.0dbm) 8.0-16.0 ghz (usb operation) 12.0-20.0 ghz (lsb operation) agc control mimix broadband's 10.0-18.0 ghz xr1007-qd gaas receiver can be used in saturated radio applications and linear modulation schem es up to 256 qam. the receiver can be used in upper and lower sideband applications from 10.0-18.0 ghz. mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2006 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. 10.0-18.0 ghz gaas receiver qfn, 7x7 mm r1007-qd july 2006 - rev 14-jul-06 xr1007-qd, mttf (yrs) vs . backplate temperature (c) 1 . 0e+00 1 . 0e+01 1 . 0e+02 1 . 0e+03 1 . 0e+04 1 . 0e+05 1 . 0e+06 55 65 75 85 95 temperature (c) mttf (years) mttf is calculated from accelerated life-time data of sin gle devices and assumes an isothermal back-plate.
page 5 of 6 app note [3] usb/lsb selection - usb lsb if1 if2 an alternate method of selection of usb or lsb: for lower side band operation (lsb): with if1 and if2 connected to the direct port (0o) and coupled port (90o) respectively as shown in the diagram, the lsb signal will reside on the input port. the isolated port must be loaded with 50 ohms. with if1 and if2 connected to the direct port (0o) and coupled port (90o) respectively as shown in the diagram, the usb signal will reside on the isolated port. the input port must be loaded with 50 ohms. for upper side band operation (usb): -90 o in phase combiner usb in phase combiner lsb -90 o if2 if1 if2 if1 mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2006 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. 10.0-18.0 ghz gaas receiver qfn, 7x7 mm r1007-qd july 2006 - rev 14-jul-06
page 6 of 6 mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2006 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. caution! - mimix broadband mmic products contain gallium arsenide (gaas) which can be hazardous to the human body and the environment. for safety, observe the following procedures: do not ingest. do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. observe government laws and company regulations when discarding this product. this product must be discarded in accordance with methods specified by applicable hazardous waste procedures. life support policy - mimix broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the president and general counsel of mimix broadband. as used herein: (1) life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) a critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to aff ect its safety or effectiveness. package attachment - this packaged product from mimix broadband is provided as a rugged surface mount package compatible with high volume solder installation. the package is a low-cost plastic package. vacuum tools or other suitable pick and place equipment may be used to pick and place this part. care should be taken to ensure that there are no voids or gaps in the solder connection so that good rf, dc and ground connections are maintained. voids or gaps can eventually lead not only to rf performance degradation, but reduced reliability and life of the product due to thermal stress. mimix lead-free rohs compliant program - mimix has an active program in place to meet customer and governmental requirements for eliminating lead (pb) and other environmentally hazardous materials from our products. all mimix rohs complian t components are form, fit and functional replacements for their non-rohs equivalents. lead plating of our rohs compliant parts i s 100% matt tin (sn) over copper alloy and is backwards compatible with current standard snpb low-temperature reflow processes as well as higher temperature (260c reflow) ?pb free? processes. part number for ordering description xr1007-qd-0n00 ni/au plated rohs compliant qfn 7x7 44l surface mount package in bulk quantity XR1007-QD-0N0T ni/au plated rohs compliant qfn 7x7 44l surface mount package in tape and reel xr1007-qd-ev1 xr1007-qd evaluation module we also offer this part with alternative plating options. please contact your regional sales manager for more information regar ding different plating types. reflow profile ramp up rate activation time and temperature time above melting point max peak temperature time within 5 oc of peak ramp down rate snpb 3-4 oc/sec 60-120 sec @ 140-160 oc 60-150 sec 240 oc 10-20 sec 4-6 oc/sec pb free 3-4 oc/sec 60-180 sec @ 170-200 oc 60-150 sec 265 oc 10-20 sec 4-6 oc/sec 10.0-18.0 ghz gaas receiver qfn, 7x7 mm r1007-qd july 2006 - rev 14-jul-06
|
